Engineering nanostructures of CuO-based photocatalysts for water treatment: Current progress and future challenges

Nowadays, increasing extortions regarding environmental problems and energy scarcity have stuck the development and endurance of human society. The issue of inorganic and organic pollutants that exist in water from agricultural, domestic, and industrial activities has directed the development of advanced technologies to address the challenges of water scarcity efficiently. To solve this major issue, various scientists and researchers are looking for novel and effective technologies that can efficiently remove pollutants from wastewater. Nanoscale metal oxide materials have been proposed due to their distinctive size, physical and chemical properties along with promising applications. Cupric Oxide (CuO) is one of the most commonly used benchmark photocatalysts in photodegradation owing to the fact that they are cost-effective, non-toxic, and more efficient in absorption across a significant fraction of solar spectrum. In this review, we have summarized synthetic strategies of CuO fabrication, modification methods with applications for water treatment purposes. Moreover, an elaborative discussion on feasible strategies includes; binary and ternary heterojunction formation, Z-scheme based photocatalytic system, incorporation of rare earth/transition metal ions as dopants, and carbonaceous materials serving as a support system. The mechanistic insight inferring photo-induced charge separation and transfer, the functional reactive radical species involved in a photocatalytic reaction, have been successfully featured and examined. Finally, a conclusive remark regarding current studies and unresolved challenges related to CuO are put forth for future perspectives.     

含谐振单元和弹性支承谐振单元的声子晶体低频禁带特性研究

在结构中周期性地添加谐振单元可以构造局域共振声子晶体并产生低频禁带。本文提出了一种具有谐振单元和弹性支承谐振单元的声子晶体结构,通过声子晶体理论和振动理论对该结构的禁带特性和禁带调控特性进行了计算与分析。结果表明,该结构可在0 Hz处形成禁带;禁带内对振动的衰减强度由衰减因子和有限结构周期数共同决定;结构中存在1条可调控禁带和3条不可调禁带;可调控禁带可以通过改变谐振单元和弹性支承谐振单元的结构参数加以调控;不可调禁带包括第一禁带,它们能够较为稳定地对一定频率的弹性波产生衰减作用。该结构所具有的禁带特性在管路、桥梁和汽车减振领域具有潜在应用。     

单层2H-MoTe2光电效应的理论研究

材料的禁带宽度是影响光电探测器探测范围的重要因素。单层2H-MoTe₂因具有合适的禁带宽度引起了科研人员广泛的研究兴趣。本文基于非平衡态格林函数-密度泛函理论,采用第一性原理方法,研究了单层2H-MoTe₂的光电效应。结果表明:在线性偏振光照射下,MoTe₂产生的光电流函数与唯象理论相吻合;在光子能量范围1.6~1.8 eV (690~770 nm),对应于红光,能产生较大的光电流。利用能带结构和态密度分析了产生较大光电流的原因主要来自第一布里渊区S点的电子受激跃迁。同时发现在锯齿型方向偏压为0.8 V时,光电流达到峰值;然而在扶手椅型方向偏压为0.4 V时,光电流就达到峰值。这些计算结果可用于指导基于MoTe₂光电探测器的设计,尤其是红外光电探测器的设计。     

田字形地震超材料甚低频宽带隙机理

在地球中传播的地震波主要有体波和表面波,而表面波中Rayleigh波对建筑物造成的破坏最为强烈。针对Rayleigh波的振动控制,提出一种田字形超材料结构。相比于传统的地震超材料,这种超材料屏障是由外部口字形框体内部嵌套十字形柱体组成,形成4个可填充区域,其外部框体采用部分埋入的方式,具有高强度、强稳定性、填充方式灵活的特点。应用有限元法计算了田字形超材料的能带结构和传输特性,并通过分析带隙边界处模态振型可知,带隙的打开是由于柱体的局域共振。结合带隙机理可知,柱体结构中土壤填充量不同可改变柱体的质量,形成不同的谐振频率,产生甚低频带隙。为进一步拓宽带隙,设计研究了正、负梯度的质量填充方式,均可得到3.3~13.1 Hz甚低频宽带隙,在谐振频率范围内两者的隔震方式分别为Rayleigh波彩虹捕获和Rayleigh波到体波的转化。最后,采用EI-Centro地震波对填充屏障进行了时程验证,加速度最大幅值衰减超过80%,为地震超材料在减震隔震方面应用提供了新的设计思路和方法。     

体积应变对立方钛酸铅电子结构和光学性质的影响

本文利用第一性原理方法计算并分析了体积应变(-11%~11%)对立方顺电相PbTiO₃的结构、稳定性、电子结构和光学性质的影响。研究发现体积应变后PbTiO₃形成焓增大,稳定性下降,其中压应变对其稳定性的影响比拉应变大。当受到拉伸应变时,立方PbTiO₃由直接带隙半导体变为间接带隙半导体,且带隙随应变增大呈先增大后降低的趋势。在发生压应变时,从复介电函数、复折射率及吸收系数的分析结果可知,在自然光照下PbTiO₃的光吸收能力仅在个别波段有所增大,但总体呈减弱趋势,当产生拉伸应变时,介电峰、吸收峰红移,表明PbTiO₃在可见光范围内光吸收能力增强,并且当应变增大到11%时,PbTiO₃的吸收能力远高于本征立方相。     

Analyzing the coexistence of DSRC and Wi-Fi networks using the Poisson line Cox process

Vehicular networks can aid in traffic monitoring, autonomous driving, and car accidents prevention. Yet, the deployment of these networks has been delayed due to the limited spectrum, especially for the case of unlicensed operations. To handle this issue, the Federal Communications Commission (FCC) proposed to permit Wi-Fi devices to operate in the 5.9 GHz band allocated to the intelligent transportation system (ITS). In a recent work, we analyzed the impact of the coexistence of dedicated short range communications (DSRC) and Wi-Fi on future DSRC network deployments by developing a stochastic geometry analytical model that considers a dynamic medium access probability (MAP) of DSRC nodes which uses carrier sense multiple access with collision avoidance (CSMA/CA). This previous work was based on the standard 2D homogeneous Poisson Point Process (PPP) model. In this work, we model the roads using the more applicable but more complex Poisson line process (PLP) Cox point process. We generate performance metrics represented through coverage probability and area system throughput, and we compare these results to our earlier work. The importance of this work is two-fold. First, it allows a further understanding of the impact of DSRC-Wi-Fi coexistence on future DSRC network deployments, and second, it highlights the effectiveness of the PLP in modeling the distribution of vehicles in an area by producing more accurate performance results.     

Selective Excitation with Asymmetric Adiabatic Pulses for NMR Spectroscopy

Existing selective pulses are mainly constructed in the forms of classically shaped pulses, such as the Gaussian pulses, or generated by using numerical optimization methods. However, all of these pulses are highly sensitive to radiofrequency (RF) intensity variation, which means their performance is highly dependent on the accuracy and stability of the RF intensity. Even a slight RF intensity deviation can cause severe degradation in the excitation profile. To solve this problem, we propose a method for narrow selective excitation by sequential application of a pair of phase‐opposite asymmetric adiabatic pulses, all within two scans. By retaining the adiabatic character, the new method is highly robust to RF intensity variation. Moreover, it has flexible excitation bandwidth, ranging from line‐selective to narrow‐band‐selective pulses. The method is tested both in numerical simulations and solution‐state NMR experiments.     

Multicomponent Molecular Orbital–Climbing Image–Nudged Elastic Band Method to Analyze Chemical Reactions Including Nuclear Quantum Effect

To analyze the H/D isotope effects on hydrogen transfer reactions in XHCHCHCHY?XCHCHCHYH (X, Y=O, NH, or CH₂) including the nuclear quantum effect of proton and deuteron, we propose a multicomponent molecular orbital‐climbing image‐nudged elastic band (MC_MO–CI–NEB) method. We obtain not only transition state structures but also minimum‐energy paths (MEPs) on the MC_MO effective potential energy surface by using MC_MO–CI–NEB method. We find that nuclear quantum effect affects not only stationary‐point geometries but also MEPs and electronic structures in the reactions. We clearly demonstrate the importance of including nuclear quantum effects for H/D isotope effect on rate constants (k_H/k_D).     

Semilattice transversals of regular bands I

Every regular band can be isomorphically embedded into a regular band which has a semilattice transversal. The latter constitute the variety of regular split bands, whose subvariety lattice is isomorphic to the lattice of regular band varieties.